How-to
Build a switch, set it up, change what it does, and read what it's telling you. Pick your switch to start.
Reading the LED
Match the orange LED on the XIAO to one below. The red charge LED, BOOT and RESET aren't part of this list.
The board is not on Wi-Fi.
What to do: Connect the board over USB and save a 2.4 GHz network on Setup.
Open SetupWi-Fi is up. The console address or the device token is missing.
What to do: Save a token on Setup.
Open SetupThe board can't use the Hue Bridge yet. It isn't paired, pairing is running, or the Bridge is missing or rejected it.
What to do: Hold BOOT for about 3 seconds, or use Pair with Bridge on Setup, then press the button on the Hue Bridge.
The Bridge is paired, and no recipes are saved.
What to do: Save at least one recipe on Switches.
Open SwitchesWi-Fi, the console, the Bridge and at least one recipe are set. One recipe on any channel is enough. A press that doesn't reach the Bridge doesn't change the pattern.
The console rejected the device token, or the console task on the board didn't start. This wins over every blink, and losing Wi-Fi doesn't turn it off. It clears once the console accepts the board.
What to do: Save a new token on Setup.
Open Setup